Installation Direction - DAYLIFF SUNVERTER 3 Installation & Operating Manual

CAUTION
2.6 Hybrid Operation
CAUTION
2.7 Others
WARNING
WARNING
CAUTION
WARNING
3. INSTALLATION AND WIRING

3.1 Installation Direction

Leave enough installation space between inverter and other objects nearby to
Ÿ
ensure good ventilation and heat dissipation. As shown on Fig 1, please install the
invert vertically or backwards with maximum 10 inclination angle do NOT install it
horizontally or transversely.
Leave enough space in front of the inverter, install the inverter at a height that is
Ÿ
convenient to operate device and read information in the LCD display screen
NOTE
For areas with altitude over 2000m, the inverter output
current should be derated at 10% for every 1500m increase in
altitude.
Do not switch off DC or AC power to the inverter while the
pump is running. The disconnect switch and/or MCB should
only be operated after the inverter is in stop mode otherwise
there will be damage .
Maintenance and inspection must be performed by a
qualied technician.
Do not disassemble the inverter during operation. The
inverter must be powered off atleast 5 minutes before
conducting maintenance and inspection and this is to avoid
the residual voltage of electrolytic capacitor in major loop
causing personal injuries.
Reverse engineering is not permitted.
At the end of its design life, the inverter should be disposed
as industrial waste. During incineration, the electrolytic
capacitor may explode and some parts may produce toxic
and harmful gas.
Installation of the inverter according to the specied
environmental conditions is the precondition for ensuring
long-term normal and stable operation of the inverter.
0
5