1. GENERATOR SPECIFICATIONS The DAYLIFF Range of portable petrol generators are dependable, quality products specially designed for mains standby and remote site power supply applications. Particular features of all DG-P models are: Reliable and economical air cooled OHV petrol engines equipped with large size Ÿ...
Page 5
Dayliff DG generators are of compact design and their advanced features, reliability and economy of operation make them the ideal solution for all small scale power supply requirements SPECIFICATIONS Oper Fuel Engine Output Tank ating Model Starter Rated Capacity Max Power...
2. SAFETY WARNINGS Read and carefully understand the Instruction Manual Instruction before use. Manual Avoid proximity to fire when refueling highly inflammable! Ensure good ventilation around the generator and do not operate indoors. Exhaust gases are very poisonous Do not use generator on a slope. Fuel spillage may occur and cause a fire.
4. ELECTRICAL CONECTIONS If the generator is to be connected for standby power use ensure a qualied electrician is employed. The generator must be isolated from the utility power when connected or serious WARNING damage will result to the generator and house power circuits. Ensure total load does not exceed the generator rating.
Change engine oil after first month or after 20hrs operation and thereafter every 3 Ÿ months or 50 hours of operation, in both cases whichever is sooner. AIR CLEANER Check the air cleaner every 3 months or after 50 hours operations, whichever is the sooner.
Page 9
PROBLEM POSSIBLE CAUSE SOLUTION Check engine speed Low output voltage Low Electrical output Excessive electrical load Reduce generator load...
8. TERMS OF WARRANTY i) General Liability In lieu of any warranty, condition or liability implied by law, the liability of Davis & Ÿ Shirtliff (hereafter called the Company) in respect of any defect or failure of equipment supplied is limited to making good by replacement or repair (at the Company’s discretion) defects which under proper use appear therein and arise solely from faulty design, materials or workmanship within a specified period.