DAYLIFF SUNVERTER 3 Installation & Operating Manual page 23

Indicator Lights &
Keys
RUN
STOP
FAULT
NORMAL
ABNORM
RUN
STOP
DATA
MODE
PROG
ENTER
+
Name
Running Indicator Light
Shutdown Indicator Light
Fault Indicator Light
Normal Indicator Light
Abnormal Indicator Light
Run Key
Stop Key
Data Inquiry Key
Mode Switch Key
Increasing Key
Decreasing Key
Programming Key
Enter Key
Reset Key Combination
4 19
Function
Green On: Inverter is running
Red
On: Inverter is shut down
Red On: System fault
Green
On: System normal
On: Water tank or well water level is
Red
abnormal
Starts the inverter
Shutdown the inverter
Enter or quit from the display status of the historical
data
1. Switch the contents to be displayed during data
viewing
2. Switch the digit to be edited during data editing
1. Increase parameter number or its value in control
parameter display status
2. Change historical date upwards or display
historical data in historical data display status
3. Increase output frequency or display current
running data upwards in running data display
status according to operation mode
1. Decrease parameter number or its value in control
parameter display status
2. Change historical date downward or display
historical data in historical data display status
3. Decrease output frequency or display current
running data downward in running data display
status according to operation mode
Enter or quit from the display status of the control
parameter
1. Confirm the content to be viewed or edited
2. Confirm and save the parameter value when the
parameter is edited
Press the combination key to reset in protection
status