4.3 Panel Operation
There are 3 kinds of status for operating panel display: running data display,
control parameter display and historical data display. The default status is the
running data display. Press the
display, and press the key again to return the default status.
Press
key to enter the status of historical data display, and press the key again
DATA
to return to the default status as shown in the schematic diagram as follows:
Display status switching
Display the
historical
data
4.4 View Running Data
Operation
Initial Status: Current running
data
MODE
MODE
MODE
PROG
Display the
running
data
DATA
PROG
Description
Display current running data: output
frequency, PV input voltage, PV input
current, PV input power of the inverter
Display current running data: Output
voltage, output current, generated
energy, module temperature of the
inverter.
Display current running data: Date,
time, input power supply mode
(PV/AC/Hybrid), operation mode of
the inverter (Manual/Auto).
20
key to enter the status of control parameter
PROG
DATA
Display the
control
data
Display