Step 3: Upon completion tighten the bottom waterproof PG terminal, close the wiring
area cover and lock it with a tightening torque between 10Nm and 12Nm.
Step 4: Fix the earth cable to the ground screw at the bottom of the shell as shown in
Fig 8.
Step 5: Wired Sunverter shown in Fig 9.
3.5 Single Phase Motor Wiring Instruction
As shown in Fig 10, remove the external capacitor on the single phase pump
Ÿ
and connect the inverter and single phase motor according to wiring
instruction.
Fig 8: Grounded Connection Diagram
Fig 9: Wiring Complete Diagram
4 12