Table of Contents
Advertisement
The installation surface should be at and closely attached to
the inverter bottom surface to ensure good heat dissipation.
NOTE
If multiple inverters are to be installed in the same cabinet, it
is recommended to adopt side by side installation. If two
inverters are to be installed longitudinally, a guide plate
NOTE
should be added in the middle.
3.2 Installation Method
Choose the installation place and drill holes according to the size and shape of
Ÿ
support plate, the recommended diameter of holes is 8±1mm with 60±5mm
depth.
Fasten the support plate on the wall with 35Nm tightening torque expansion
Ÿ
bolt.
Fig 2: Mounting Hole
Diagram
Hang the mounting groove in inverter back on the support plate, when inverter
Ÿ
is reliably hung up, fasten the screw nuts between the support plate and
inverter.
Fig 1: Installation Direction Diagram
Fig 3: Inverter Mounting
Installation Diagram
6
A >100mm
B>200mm
B>300mm for 11kW
Hide quick links:
Advertisement
Table of Contents
