Identification; Marking; Eu Declaration Of Conformity - Abicor Binzel ABICAR ADVANCED Operating Instructions Manual

ABICAR ADVANCED

1 Identification

The welding tractor ABICAR ADVANCED is used to produce continuous butt and fillet welds. It is attached
with permanent magnets and can be used with MIG/MAG welding torches. The device must only be
operated with original ABICOR BINZEL spare parts. These operating instructions only describe the welding
tractor ABICAR ADVANCED.
When used in these operating instructions, the terms "device", "product" and "welding tractor" always refer
to the welding tractor ABICAR ADVANCED.
In connection with the accessories, the following use is enabled:
— Use of large-diameter welding torches
— Welding with two welding torches simultaneously
— Movement of the equipment along external edges, lap joints, low walls, walls with holes, ceilings,

1.1 Marking

This product fulfils the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.

1.2 EU declaration of conformity

tubes and tanks
(EN) EC Declaration of Conformity
Translation of the German declaration of conformity
Manufacturer
Authorized person for the
technical documentation
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product Description
magnets and can be used with the MIG/MAG welding torch.
Designation
Trade name
The aforementioned object of this Declaration described above, by virtue of its design and construction in the
version we have brought onto the market, complies with the applicable essential health and safety
requirements of the harmonization legislation of the European Union listed below.
This declaration ceases to be valid in case of any modification of the devices without our authorization.
Relevant Union harmonisation
legislation
Harmonized standards used
Harmonized national standards
and technical specifications
Alten-Buseck, 25.06.2021
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving: Document no.:
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Alten-Buseck
Germany
Hubert Metzger
Address – see address of manufacturer
The ABICAR ADVANCED welding tractor assists in the creation of
continuous blunt seams and fillet weld. It is attached with permanent
Welding tractor Function Welding torch driving carriage for
mechanized welding
ABICAR Type ADVANCED (100-240 V)
Source of information
2006/42/EC Machinery (Filing L96 from 29.03.2014)
2014/30/EU EMC (Filing L96 from 29.03.2014)
2011/65/EU RoHS (Filing L174 from 01.07.2011)
EN ISO 12100:2010
EN 60204-1:2018
EN IEC 60974-10:2014+A1:2015
EN IEC 63000:2018
02-05-2021 06-May-2021
1 Identification
Page 3 of 6
EN - 3