Abicor Binzel ABICAR ADVANCED Operating Instructions Manual page 38

6 Putting into operation
Fig. 5
A Cross slide
B On/off switch
C Guide arm
D Securing lugs
A
G
F
E
6.1 Changing the speed indicators
Electric shock from electronic components
Improper work on electronic components may result in potentially fatal electric shock.
► Only have the speed indicator changed by a qualified electrician.
Fig. 6
A Jumper
To change the speed indicators from cm/min to inch/min, and vice versa, perform the following:
Loosen the mounting screws in order to access the rear of the operating panel.
1
 Fig. 3 Operating panel on page DE-10
Set the jumper (A) to the correct position.
2
Re-secure the operating panel with the screws.
3
EN - 12
Overview
DANGER
Rear of operating panel
ABICAR ADVANCED
E Magnetic lever
F Connection bush for weld start signal cable
G Operating panel
B
C
D
A
Zoll
cm