Identification; Marking - Abicor Binzel ABICAR ADVANCED 42V Original Operating Instructions

ABICAR ADVANCED 42V

1 Identification

The welding tractor ABICAR ADVANCED 42V is used to produce continuous butt and fillet welds. It is
attached with permanent magnets and can be used with MIG/MAG welding torches. The device must only
be operated with original ABICOR BINZEL spare parts. These operating instructions only describe the
welding tractor ABICAR ADVANCED 42V.
When used in these operating instructions, the terms "device", "product" and "welding tractor" always refer
to the welding tractor ABICAR ADVANCED 42V.
In connection with the accessories, the following use is enabled:
— Use of large-diameter welding torches
— Movement of the equipment along external edges, lap joints, low walls, walls with holes, ceilings,
The device must only be used with the following components:
— iMIG POWER 400 welding power source
— ABIMIG AT 355 LW 4.0 m KZ-2 PT welding torch
— ABIMIG WT 440 4.0 m WZ-2 PT welding torch
— ABIMIG MTG 455 T 4.0 m KZ-2 PT welding torch

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.
tubes and tanks
1 Identification
EN - 3