Identification; Safety; Designated Use; Obligations Of The Operator - Abicor Binzel ABIROD G350 Operating Instructions Manual

Alignment jig

1 Identification

The alignment (bending angle) of the changeable torch necks outside of the welding cell can be checked
using the alignment jig. It is also possible to realign the torch neck slightly using the same level of clamping,
for example after a collision. These operating instructions describe how to use the alignment jig.
The handling and description of this device are the same for all torches with the exception of the torch neck
fastening. The Alignment jig must only be operated using original ABICOR BINZEL spare parts.

2 Safety

The enclosed safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the manner
described in these instructions. In doing so, observe the operating, maintenance and servicing
conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.

2.2 Obligations of the operator

• Store the operating instructions within easy reach of the device for reference and enclose them when
passing on the product.
• Commissioning, operating and maintenance work may only be carried out by qualified personnel.
Qualified personnel are persons who have received the necessary specialist training, knowledge and
experience to assess the tasks assigned to them and identify possible dangers
(in Germany see TRBS 1203 [Technical Rules for Operating Safety]).
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the relevant country.
• Ensure the work area is well lit and keep it clean.
Observe the following standards and guidelines in particular:
• 89/391/EEC: Directive on the introduction of measures to encourage improvements in the safety and
health of workers at work.
• 2009/104/EC: Directive concerning the minimum safety and health requirements for the use of work
equipment by workers at work.
• 2004/108/EC: Directive on the approximation of the laws of the Member States relating to
electromagnetic compatibility.
• Occupational health and safety regulations of the relevant country. For example, in Germany:
Arbeitsschutzgesetz (Occupational Health and Safety Act) and Betriebssicherheitsverordnung
(Ordinance on Industrial Safety and Health).
• Regulations on occupational safety and accident prevention.

2.3 Personal protective equipment (PPE)

To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves and
safety shoes.
1 Identification
EN - 3