Product Description; Setup And Operation - Abicor Binzel ABICAR ADVANCED Operating Instructions Manual

ABICAR ADVANCED
Returns
► Use the original packaging and the original packaging material for returns.
► If you have any questions concerning the packaging or how to secure the device for transportation,
please contact your supplier, carrier or transport company.

4 Product description

4.1 Setup and operation

Fig. 2
A Cross slide
B Adjusting screw, vertical
C Handle
D Welding torch mount
E Stop lever for welding torch tilt angle
F Securing the torch
G On/off switch
H Power cable
A
P
O
N
M
The device is a portable welding tractor onto which up to two welding torches can be attached for semi-
automatic horizontal longitudinal welding on magnetic surfaces. The permanent magnet integrated into the
housing allows welding work to be carried out on all magnetic surfaces in the horizontal and vertical
position.
The device consists of a housing, a drive system with control, a cross slide, several guide arms and a welding
torch mount. The device is uniformly driven by four wheels. The cross slide allows the precise adjustment of
the welding torch in the vertical and horizontal position. Different locations on the workpiece can be
reached with the various guide arms.
Setup and operation
B
L
4 Product description
I 2 × guide arms
J 2 × knurled screw guide arms
K 2 × securing lugs
L 4 × drive wheels
M Magnetic lever
N Bushing for weld start signal cable
O Adjusting screw, horizontal
P Operating panel
C D E F
G
H
I
J
K
EN - 9