Telos 2101 Series User Manual page 44

TELOS 2101 USER'S MANUAL
Directors" can access 24 lines. Click "Add". Then the form below will be displayed
(example with 12 lines WITH Show1 name).
For each "Show" line you have three fields: Phone Number, Line Name, and Busy All
Group (block all group). The Phone Number field represents the phone number to be
used by that particular "show" line. The Line Name field represents the name that
will be displayed in Assistant Producer for 2101 call screening software. The Busy
All Group Check Box denotes whether that line will included in the Block All
function. If the box is checked, that line will be affected by Block All. If it is left
unchecked (default) that line will not be affected by this function. To configure the
show, enter the phone number, line name (optional), and denote if the line will be in
the busy all group.
Near the bottom of the form there is a drop down box for the Key for Outside Line.
This box is reserved for future use and should be left blank (the default setting).
You can then choose whether or not the studio has a password. This is the password
used by the Assistant Producer for 2101 clients to log into the show. This is helpful
to allow only certifiable personnel access to shows with Assistant Producer for 2101.
If the password field is left blank (default) then the show will not have a password.
The Hold on Next feature, if enabled, allows the user to seize a new line and put the
previous caller back on hold in just one step, by pressing the NEXT key on the
Desktop Director. It can be set up for None (default), Talent Directors, Producer
Directors or Both. If set to None, pressing the NEXT key will seize the next caller
and drop the previous one.
Press Apply to store the settings. Press Cancel to restore the previous settings.
PART III
THE SERIES 2101 HUB
III-38
SECTION 4 – THE 2101 HUB WEB CONFIGURATION PAGES