Each card supports connections for up to four Studio Interfaces. The system manages the
T-Link connections and any port can be used for any Studio Interface.
The four amber LEDs at the bottom indicate "Loss of Signal" and should be extinguished if
a Studio Interface is present and active. The top LED corresponds to the top T-Link port
Each card supports connections for up to four Studio Interfaces. The system manages the
T-Link connections and any port can be used for any Studio Interface.
The four amber LEDs at the top indicate "Loss of Signal" and should be extinguished if a
Studio Interface is present and active. The top LED corresponds to the top T-Link port and
NOTE: The Rev A version requires a custom "Crossover Cable" to connect to the
III-6
TELOS 2101 USER'S MANUAL
The T-Link Hub I/O Card, Rev B Style.
and so forth.
The T-Link Hub I/O Card, Rev A style.
so forth.
Studio Interface. See Appendix 3.
PART III
THE SERIES 2101 HUB
SECTION 2 – PREPARING THE HUB FOR INSTALLATION