Installing The Lift Transverse Unit - Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

Please note:
Use a lifting aid to lift the
product. The positions
indicated with an (X) in the
drawing are used as lifting
points for a round sling.
1. Set the lift transverse
unit in the section profi le.
2. After aligning the lift
transverse unit, tighten all
mounting bracket screws.
Please note:
Use a workpiece pallet to
help align the product.
7.6.2

Installing the lift transverse unit

X
1
!
Fig. 8: Installing the lift transverse unit (480 x 640 mm HQ 2/C-H shown)
3 842 358 792/2016-12, Material and information fl ow technology: HQ 2/C-H, HQ 4, Bosch Rexroth AG
F ≥2000
X
X
1
8x
2
SW13
M =25 Nm
D
Assembly 21/64
X
1
!
4x
2
SW6
M =18 Nm
D
551 262-13