Symbols - Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

6/64 About this documentation
Bosch Rexroth AG, Material and information fl ow technology: HQ 2/C-H, HQ 4, 3 842 358 792/2016-12
Safety instructions are set out as follows:
Type and source of danger
Consequences of non-compliance

Steps to prevent danger

...
• Warning sign: points out the danger
• Signal word: indicates the severity of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Prevention: states how the danger can be avoided
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTE
1.3.2

Symbols

The following symbols indicate important information that is not safety-relevant but
increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not heeded, the product cannot be used and/or
operated as designed.

Single, isolated step
1. Numbered steps:
The numbers indicate that the steps must be performed in sequence.
2.
3.
SIGNAL WORD
Meaning
Indicates a hazardous situation that will result in serious
injury or death if not avoided.
Indicates a hazardous situation that may result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
Property damage: The product or the surrounding area
could be damaged.