Table of Contents
Advertisement
Please note:
• Only 180° horizontal
rotation for non-square
workpiece carriers.
• With sizes 1 and 2, angle
of rotation 90°, the
reverse rotation of the
rotary table is performed
below the belt section.
• With size 3, angle of
rotation 90°, the reverse
rotation of the rotary table
is performed above the
belt section.
4 Delivery contents
The following is included in the delivery:
• 1 lift rotate unit HD 2/H
• Mounting material
• Pneumatic elements such as screw fi ttings, throttle check valves, etc
• 1 assembly instructions "HD 2/H, lift rotate unit"
The protective case kit is not part of the delivery and must be ordered separately.
4.1 Delivery state
• Lift rotate unit HD 2/H manufacturer-assembled.
5 About this product
5.1 Performance description
Fig. 1:
Lift rotate unit HD 2/H performance description
5.1.1
Lift rotate unit HD 2/H use
• Installation in conveyor belt BS 2... or conveyor section ST 2...
• Lifting and rotating (90° / 180°) workpiece carriers WT2 from the conveyor section
(> 45 mm via conveyor level, see Fig. 1, detail X).
5.1.2
Lift rotate unit HD 2/H design
• Extremely compact construction Suitable for limited installation space.
• Pneumatic drive
Delivery contents
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
11/56
358 732-01
Advertisement
Table of Contents
