Conversion To Motor Mounting M Left (By Customer) - Bosch Rexroth HQ 2/C-H Assembly Instructions Manual

Please note
(Only if necessary):
The customer has to switch
from motor mounting M
standard (on right) to motor
mounting M on left before
installing the lift transverse
unit.
A: Motor mounting M
standard (right)
B: Motor mounting
M left (customer
conversion)

For removal of the power
train, see Section 10.4.3
"Replacing the
transmission, internal
motor mounting" on
page 48.

Rotate the drive axis 180°
before installation (B).
The transmission will
stay aligned.

Install the power
train and belt section
in reverse order of
that described in
Section 10.4.3
"Replacing the
transmission, internal
motor mounting" on
page 48.

7.5 Conversion to motor mounting M left (by customer)

A
B
2x
SW13
M =25 Nm
D
2x
SW13
M =25 Nm
D
Fig. 6: Conversion to motor mounting M left (by customer)
3 842 358 792/2016-12, Material and information fl ow technology: HQ 2/C-H, HQ 4, Bosch Rexroth AG
Assembly 19/64
2x
SW13
2x
SW13
551 261-50