Advertisement
Dimensions
Material: PA6 (black)
Material: ST37
Rear unlocking
zinc coated
button link: ø10.4
59
Material: ST37
zinc coated
55*
Material: ST37
40
zinc coated
20
20
Material: ST37
zinc coated
W
(15)
2-M6 screw (*2)
Panel cut-out
Mounting
Centers: X
64
4-M6
Rear lever hole
Rear unlocking button hole
ø11 (*1)
Material:
PA6 (black)
61*
136
110
Material: ST37
zinc coated
Material: PA6 (black)
2-M6 screw (*2)
Material: SUS
Connector
(conduit)
3-M5 screw
Rear unlocking
button link: ø10.4
One-side screw (M5)
Material: ST37
zinc coated
Material: ST37
zinc coated
80
Material: ST37
zinc coated
2-M6 screw (*2)
Slide Handle Actuator for HS1T
Legend
HS9Z-EH1L slide handle actuator
➀
Manual rear unlocking button kit for frame
➁
(HS9Z-FL5: sold separately)
HS1T Interlock switch with rear unlocking button
➂
(HS1T-44ZL**-: sold separately)
Interlock switch with rear unlocking button selection table
Part No.
HS9Z-FL54
HS9Z-FL55
[HS9Z-FL56]
[HS9Z-FL57]
Part No. in [ ] are not for standard sale. To order, contact IDEC.
HS1T-44ZLSM- (Side conduit model)
8
Material:
PA66 (red)
Material: PA6 (black)
Material: ST37
zinc coated
ø11 (*1)
Material:
PA6 (black)
In the example shown on the left, a 40mm frame
is used.
Note 1: Mount the product before operation and
ensure that rear lever does not interfere with
the frame.
59
136
Note 2: When choosing mounting part (frame), note
that the mounting screws are M6 .
55*
40
110
Material: ST37
20
20
zinc coated
Applicable frame size (hinged door)
Material: PA6 (black)
Frame Size: W
40 ≤ W ≤ 45
45 ≤ W ≤ 50
Material: SUS
50 ≤ W ≤ 55
55 ≤ W ≤ 60
• Make sure to observe the applicable frame size, otherwise the
actuator cannot be inserted/removed properly.
3-M5 screw
W
(15)
Dimensions in mm.
Item
Mounting Part Thickness: Y
30≤Y≤35
35<Y≤45
45<Y≤55
55<Y≤65
8
61*
8
Mounting Centers: X
2-M6 screw (*2)
55 ≤ X ≤ 60
55 ≤ X ≤ 60
60 ≤ X ≤ 70
65 ≤ X ≤ 70
Connector
(conduit)
5
One-side screw (M5)
Material:
PA66 (red
Advertisement
