Advertisement
UnLock
Emergency escape from inside hazardous areas
Rear lever
Rear unlocking button
Push the rear unlocking button
1
to release the lock and stop the
hazard.
Even if an operator is trapped inside the hazardous area, the operator can escape by unlocking the lock using the rear
unlocking button and by sliding the lever to open the door. (Only when using the HS1T rear unlocking button model. Use
with an optional manual rear unlocking button kit for frame).
ANSI/RIA R15.06-1999 11.2.2 Interlocking portion
b) The interlocking portion of the interlocked barrier shall be installed, applied, and maintained so that:
8) be capable of being easily unlocked from the inside of the safeguarded space with or without power available, when the possibility of full body access exists;
Two-step action prevents inadvertent operation
1
Grab the handle, and pull the knob to unlatch.
When inserting the actuator,
1
Two-step action prevents handles from inadvertend operation.
Padlock
Padlocks can be installed on the padlock hole. By using padlocks, other operators
cannot operate the slide handle actuator, preventing inadvertent operation of machines and
ensuring safety of operators.
8.4 Protection of personnel within the safeguarded space
Personnel required to perform tasks within the safeguarded space shall be protected by:
a) Preventing the re-initiation of any motion or hazardous process while personnel are within the safeguarded space, for example locking
a gate open;
2
Slide the lever.
unlatch the knob,
slide the handle.
2
3
Open the door and escape.
Knob
2
Slide the handle and insert the actuator.
(padlocks must be purchased by the customer)
Rear unlocking button kit
Rear unlocking button kit
(HS9Z-FL5: optional)
(HS9Z-FL5: optional)
Press the
red
case of an
emergency
PUSH for Safety
Padlock hole
Padlock hole
button in
3
Advertisement
