Vfd Vfd - Graco SaniForce 2150 Operation

VFD Operation
VFD Operation Operation
VFD VFD Operation
VFD VFD VFD Control Control Panel Control Panel Panel
NOTE: NOTE: NOTE: This information is specific to Graco's
VFD. For complete information about another
manufacturer's VFD, see the manufacturer's
instructions supplied with the VFD.
• The control panel display shows the status of the
motor.
• The green RUN key starts the motor.
• The red STOP key stops the motor.
• Use the arrow keys to speed up or slow down the
motor.
• The blue M key accesses the VFD menu. See the
manufacturer's instructions for menu descriptions
and information.
24
NOTE: If the M key is pressed, use the arrow keys
NOTE: NOTE:
to scroll through the VFD menu.
AUTO
Figure 11 VFD Control Panel
Adjust the the Speed Speed
Adjust Adjust the Speed
VFD settings are preset at the factory for most
applications. To change the speed of the pump, use
the arrow keys on the VFD control panel to increase
or decrease the motor speed.
FWD
REV
RUN
STOP
3A5132M