Maintenance Of The Front Wheel Hub [Inserted Adapters Version 1] - DT SWISS ROAD 2013 SPLINE RC 38 Technical Manual

4.2

Maintenance of the Front Wheel Hub [Inserted Adapters Version 1]

figure 4.1: Overview: front wheel with inserted adapters (version 1)
1 adapter left
2 ball bearing
Preparatory Steps
not required
Required Material
multi purpose grease
NOTE
Risk of damage of the adapters!
To avoid damages, only use grind clamping jaws, aluminium clamping jaws or special tools to clamp the
adapters.
Removing the Adapters
1. Clamp one of the adapters (fig.4.1/1, 5) into a vice.
2. Pull off the wheel, respectively the hub.
3. Clamp the second adapter into the vice.
4. Pull off the wheel, respectively the hub.
3 axle
4 hub shell
Specification
®
SPLINE Technical Manual
5 adapter right
Link
Amount
as required
17