Changing A Single Spoke On The Rear Wheel - DT SWISS ROAD 2013 SPLINE RC 38 Technical Manual

5.5.4 Changing a Single Spoke on the Rear Wheel

Preparatory Steps
Dismount the wheel.
Dismount the tire and if necessary the tube and the rim tape.
Clean the wheel and check for damages.
Loosen the spoke.
Removing the Spoke
1. Slide the spoke with the nipple out of the rim.
2. Only for spokes on the inner side of the hub:
Pull the spoke over the spoke of the second cros-
sing.
3. Slide the spoke through the hub and remove it.
Attaching a New Spoke
1. Slide a new spoke through the spoke hole of the
hub.
®
SPLINE Technical Manual
Link
chap.5.5.1, p.58
64