Fast Elsa Callback; Callback As Specified In Rfc 1570 (Ppp Lcp Extensions - ELSA LANCOM Office Manual

R20 Technical basics
Callback number specified by the ELSA MicroLink Cable
The remote station is called back after the name has been verified. The callback entry of
the appropriate remote station must have the value 'Name' for this setting and one call
number must be specified in the name list.
Following the authentication process, the message below will appear in Windows 95
which the user can only confirm:
Callback to a Windows 95, Windows 98 or Windows NT workstation is initiated
approximately 15 seconds after the connection is dropped. This is delay is specified by
Windows and cannot be shortened.

Fast ELSA callback

This fast, ELSA-specific process is ideal if two ELSA MicroLink Cable are to communicate
with one another via callback.
The caller who would like to be called back sets 'Wait for callback from remote site'
in the name list ('Looser' when configuring via a terminal program or Telnet).
The return caller selects 'Call back the remote site (fast procedure)' in the name list
and sets the number ('ELSA').

Callback as specified in RFC 1570 (PPP LCP extensions)

There are five methods of demanding a callback specified in RFC 1570. All versions are
accepted by the ELSA MicroLink Cable. All versions will be processed in the same way,
however:
The ELSA MicroLink Cable drops the connection to the remote station after
authentication and then calls it back three seconds later.
ELSA LANCOM Office
Ver.0:26.08.99/Ver.14:04.04.00