Remove The Bottom Cover - HP Victus 16z-e000 Maintenance And Service Manual

Table 6-2 Battery description and part number
Description
4 cell, 70 Whr, Li-ion battery
WARNING! To avoid personal injury and damage to the product:
● Do not puncture, twist, or crack the battery.
● Do not cause an external puncture or rupture to the battery. They can cause a short inside the battery,
which can result in battery thermal runaway.
Do not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which might
●
puncture the battery.
● Do not compress or squeeze the battery case with tools or heavy objects stacked on top of the case.
These actions can apply undue force on the battery.
Do not touch the connectors with any metallic surface or object, such as metal tools, screws, or coins,
●
which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT: Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work or shut down the computer through Windows
before you remove the battery.
Remove the battery:
1. Remove the tape from the battery cable connector on the system board (1), and then disconnect the
battery cable from the system board (2).
2. Remove the six Phillips M2.0 × 3.0 screws (3) that secure the battery to the computer.
3. Remove the battery from the computer (4).
Preparation for disassembly on page
Bottom cover on page 37).
Spare part number
M39179-005
33).
Component replacement procedures 39