Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Preparation For Disassembly; Bottom Cover - HP Victus 16z-e000 Maintenance And Service Manual

6 Removal and replacement procedures for
authorized service provider parts
This chapter provides removal and replacement procedures for authorized service provider parts.
IMPORTANT:
provider. Accessing these parts can damage the computer or void the warranty.
NOTE: Details about your computer, including model, serial number, product key, and length of warranty,
are on the service tag at the bottom of your computer.

Component replacement procedures

To remove and replace computer components, use these procedures.
NOTE: HP continually improves and changes product parts. For complete and current information about
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
You must remove, replace, or loosen as many as 71 screws when you service the parts described in this
chapter. Make special note of each screw size and location during removal and replacement.

Preparation for disassembly

To remove and replace computer components, use these procedures.
See Removal and replacement procedures preliminary requirements on page 25
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.

Bottom cover

To remove the bottom cover, use this procedure and illustration.
Table 6-1 Bottom cover descriptions and part numbers
Description
Bottom cover for use in 80 W models
● Ceramic white
● Mica silver
● Performance blue
Bottom cover for use in 60 W models
Ceramic white
●
Components described in this chapter should be accessed only by an authorized service
for initial safety procedures.
Spare part number
M54778-001
M75028-001
M75030-001
M54777-001
37