HP Victus 16z-e000 Maintenance And Service Manual page 44

1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Two solid-state drive slots are available on the computer, as shown in the following illustration. The primary
drive is on the right side of the computer near the memory modules.
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the bracket and drive to the computer.
2. Pull the drive out of the socket, and remove the drive with bracket from the computer (2).
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Preparation for disassembly on page
Bottom cover on page 37).
33).
Battery on page 38).