Hard Drive; Prepare The Computer For Disassembly (Preparation For Disassembly; Place The Computer In Battery Safe Mode (Battery Safe Mode; Remove The Bottom Cover (Bottom Cover - HP ProBook 455R G6 Maintenance And Service Manual

Hard drive

Table 5-5 Hard drive, Hard Drive Hardware Kit, and hard drive bracket descriptions and part numbers
Description
Hard drive, 1 TB, 5400 rpm, 7 mm
Hard drive, 500 GB, 7200 rpm, 7 mm
Hard Drive Hardware Kit (includes hard drive cover and connector)
Hard drive bracket (used to add a hard drive to models with a solid-state drive as primary storage)
Before removing the hard drive, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Remove the hard drive:
1. Release the ZIF connector (1), and then disconnect the hard drive cable from the system board (2).
2. Remove the two Phillips M2.0 × 4.0 screws (3) that secure the hard drive to the computer.
3. Lift the tab (4), and then use the tab to lift the hard drive from the bay (5).
38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page 41).
32).
33).
Spare part number
L30422-001
703267-001
L45094-001
32).