Quick Start; Configuration; Wan - Billion BiPAC 7100S User Manual

Adsl modem/router with 10/100m lan port

Hide thumbs Also See for BiPAC 7100S:

Table of Contents

3.4.2 Quick Start

If you use this device to access the Internet through the ISP, this web page is enough for you to configure

this router and access the Internet without a problem. Please check Chapter 3.3 (Information from the

ISP), then enter the proper values into this web page, click the Apply button and then click the Save

Config button to save all of the configuration parameters to FLASH. After the router reboot, you may

check the Status web page to check whether the router is connected to the ISP or not. In most cases, you

can access the Internet immediately. If not, please refer to the sections below for more information.

When you click this item, you get following sub-items to configure BIPAC 7100S.

LAN, WAN, Firewall, System, VPN, Virtual Server, Advanced and Help

The screens below contain settings for the WAN interface toward Internet.

Select Adapter

Chapter 3 Configuration

Table of Contents