Bridge Filtering; Intrusion Detection - Billion BiPAC 7100S User Manual

Adsl modem/router with 10/100m lan port

Hide thumbs Also See for BiPAC 7100S:

Table of Contents

Billion BIPAC 7100S ADSL Modem/Router

3.4.3.4.2 Bridge Filtering

Enable Bridge Filtering: Check Yes to enable this function or check No to disable.

Src MAC: Enter the source MAC address.

Dest MAC: Enter the destination MAC address.

Type: Enter the Ethernet type.

Block

Forward: Check Block if you want to block requests from the source MAC address sending

to the destination MAC address. Check Forward if you want to forward requests from the source MAC

address sending to the destination MAC address.

Check "Enable" if you want to detect invader sneak in your computer without permitted .The ADSL Router

can automatically detect and block the DoS (Denial of Service) attack if user enables this function. This

kind of attack is not to achieve the confidential data of this network; instead, it aims to crush specific

equipment or the entire network. If this happens, the users will not be able to access the network

resources. There are few samples of hacker patterns implemented as below.

IP Spoofing

Ping of Death (Length > 65535)

Land Attack (Same source / destination IP address)

IP with zero length

Sync flooding

Smurf Attack (ICMP Echo with x.x.x.0 or x.x.x.255)

Table of Contents