Firewall; Packet Filter - Billion BiPAC 7100S User Manual

Adsl modem/router with 10/100m lan port

Hide thumbs Also See for BiPAC 7100S:

Table of Contents

Billion BIPAC 7100S ADSL Modem/Router

3.4.3.4 Firewall

User can decide to enable this firewall function including Packet Filter, Block Hacker Attack, and Block

WAN request features for better security control or not. But be noted, it wastes network processor

computation power. The performance will be lower about 10% to 15%. More firewall features will be

added continually, please visit our web site to download latest firmware.

Packet filtering function enables you to configure your router to check specified internal/external user (IP

address) from Internet access, or you can disable specific service request (Port number) to /from

Internet. This configuration program allows you to set up different filter rules up to 6 for different users

based on their IP addresses or their network Port number. The relationship among all filters is "or"

operation, which means the device checks these different filter rules one by one, stating from the first rule.

As long as one of the rules is satisfied, the specified action will be taken.

Add: Click this button to add a new packet filter rule. After click, next figure will appear.

Edit: Check the Rule No. you want to edit. Then, click the "Edit" button.

Delete: Check the Rule No. you want to delete. Then, click the "Delete" button.

Table of Contents