Vicon VM614-2 Installation & Operation Manual page 14

1) VM614-2 E 11/15/00 10:40 AM Page e-12
Using Auto Mode
e-12
To use AUTO mode, press the AUTO button to light LED red.
In Auto mode, the channel for CAMERA input is automatically
converted as the following OSD, in CA1
an interval of auto time (1 to 10 seconds, set in MENU mode):
CA1
(After Auto time)
OSD (On Screen Display)
1. When there are CAMERA inputs, OSD is displayed as follows:
CA1
(After Auto time)
CA2 CA3
CA3
CA2
(After Auto time)
CA2 CA3
(After Auto time)
CA4 order, at
••••
••••