Control Panel Description; Description Of The Interface; Description Of The Standby Screen; Description Of Status Icons - DeDietrich ALEZIO O HYBRID User Manual

4.4

Control panel description

Fig.7
1
2
3
Fig.8
5
1 2
7763552 - v02 - 29062020
4.4.1
1
2
3
4
4
MW-5000915-1
4.4.2
The control panel on your appliance automatically goes into standby mode
if no keys are pressed for a period of 5 minutes: the backlighting is
4
switched off and information relating to the general status of the appliance
is displayed.
MW-1001546-2
Press one of the buttons on the user interface to switch standby off.
1 Temperature measured by the outdoor temperature sensor
2 Day and time
3 Hydraulic pressure in the installation
4 General status of the appliance
5 Icons indicating the appliance status
3
4.4.3
Tab.16
Icons

Description of the interface

Return key
Main menu key
Display
Selection/validation button

Description of the standby screen

Description of status icons

Icons indicating the appliance status
Description
Automatic switch from heating mode to cooling mode
Steady symbol: heating active
Flashing symbol: heating in progress
Steady symbol: cooling active
Flashing symbol: cooling in progress
Steady symbol: domestic hot water available
Flashing symbol: domestic hot water production in progress
Frost protection mode activated
Summer mode activated. No heating possible. Cooling and
domestic hot water production only.
Error detected
The heat pump compressor is running.
Operating test mode activated
Installer level activated
4 Description of the product
200 ESL HYBRID 25