3
Technical specifications
3.1
Homologations
3.2
Technical data
Tab.3
Conditions of use
AWHP 4.5 MR
Limit water op
+18 °C/+55 °C
erating temper
atures in heat
ing mode
Outdoor air op
-15° C/+35 °C
erating temper
ature limits in
heating mode
Water operat
+7°C / +25°C
ing temperature
limits in cooling
mode
Outdoor air op
+7 °C/ +46 °C
erating temper
ature limits in
cooling mode
Tab.4
Heating mode: outside air temperature +7 °C, water temperature at the outlet +35 °C. Performances in accordance
with EN 14511-2.
Measure
Unit
ment type
Heat output
kW
Coefficient
of Perform
ance (COP)
7613348 - v06 - 10122018
3.1.1
This product complies with the requirements of the following European
Directives and Standards:
This product conforms to the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
In addition to the legal requirements and guidelines, the supplementary
guidelines in this manual must also be followed.
Supplements or subsequent regulations and guidelines that are valid at
the time of installation shall apply to all regulations and guidelines
specified in this manual.
3.2.1
Maximum operating pressure: 0.3 MPa (3 bar)
AWHP 6 MR-3
+18 °C/+60 °C
-15° C/+35 °C
+7°C / +25°C
+7 °C/ +46 °C
AWHP 4.5
AWHP 6
MR
MR-3
4.6
5.82
5.11
4.22
Directives
Pressure Equipment Directive 2014/68/EU
Low Voltage Directive 2014/35/EU
Generic standard: EN 60335-1
Relevant standard: EN 60335-2-40
Electromagnetic Compatibility Directive 2014/30/EU
Generic standards: EN 61000-6-3, EN 61000-6-1
Relevant Standard: EN 55014
Heat pump
AWHP 8 MR-2
+18 °C/+60 °C
-20° C/+35 °C
+7°C / +25°C
+7 °C/ +46 °C
AWHP 8
AWHP 11
MR-2
MR-2
7.9
11.39
4.34
4.65
3 Technical specifications
AWHP 11 MR-2
AWHP 16 MR-2
AWHP 11 TR-2
AWHP 16 TR-2
+18 °C/+60 °C
+18 °C/+60 °C
-20° C/+35 °C
-20° C/+35 °C
+7°C / +25°C
+7°C / +25°C
+7 °C/ +46 °C
+7 °C/ +46 °C
AWHP 11
AWHP 16
TR-2
MR-2
11.39
14.65
4.65
4.22
200 ASL HYBRID
AWHP 16
TR-2
14.65
4.22
17