Adjustment And Procedure When Replacing The Boards; Notes On Replacing The Sy-416 Board; Connection Diagram - Sony SNC-WR632C Service Manual

Adjustment and Procedure When Replacing the Boards

2-1. Notes on Replacing the SY-416 Board

When replacing the SY-416 board, perform the following procedure. Otherwise, a trouble such as being
unable to obtain the IP address in DHCP occurs, and this unit does not operate normally.
. Replace the old Mac address label with the new one. (Section 2-1-2)
. Rewriting of Mac address and serial number (Section 2-1-3)
. Firmware version upgrade (Section 2-1-4)
Be sure to perform the version upgrade. Otherwise, this unit may not operate normally.
n Perform the adjustment in the sequential order as described.

2-1-1. Connection Diagram

When using HPoE + Hub (Powerdsine PD-9501G or equivalent)
HPoE Hub (Powerdsine PD-9501G or equivalent)
Camera
LAN cable
(straight)
Color video monitor
75 termination
When using 24 VAC power supply (rating: 80 W or more)
24 VAC power supply (rating: 80 W or more)
Camera
Power cable
LAN cable
Color video monitor
75 termination
SNC-WR632C/WR602C
Section 2
Power supply
Personal computer
Power supply
Personal computer
2-1 (E)