Sony SNC-WR632C Service Manual page 15

4. Disconnect the five harnesses from the connectors (CN5002, CN5501, CN5502, CN5505 and
CN5506) on the HC-51 board.
5. Remove the four screws, then remove the TILT block.
TILT block
PSW2.6 6
CN5505
HC-51 board
CN5002
CN5501
CN5502
Harnesses
CN5506
Harnesses
6. To install, reverse the removal procedure.
1-11 (E)
SNC-WR632C/WR602C