Sony SNC-WR632C Service Manual page 40

7. Click the [Setting] button, and then type "admin" in the user name and password respectively.
The setting menu of camera is displayed.
System
8. Click [System].
9. Click the "Date & time" tab.
10. After setting the time zone correctly, set the time setting to "Synchronize with PC ", and then click
the [OK] button.
11. Check that the date and time of this unit are set correctly.
When there is a date/time deviation by one day or more, correctly set the date and time of PC. (Refer
to the User's Guide.)
12. Double-click "G6 Serial_Inputter For Service.exe".
"G6 Serial_Inputter For Service.exe" is started.
2-4 (E)
"Date & time" tab
Time setting
Time zone
[OK] button
[START] button
SNC-WR632C/WR602C