Sony SNC-WR600 User Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. Ipela SNC-WR600
  6. User manual
Sony SNC-WR600 User Manual

Sony SNC-WR600 User Manual

Hide thumbs Also See for SNC-WR600:
Table of Contents

Advertisement

Quick Links

Download this manual
A-EMG-100-17(1)
Network Camera
User's Guide
Software Version 3.0
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNC-WR630/WR632/WR632C/WR600/WR602/WR602C
© 2013 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony SNC-WR600

Summary of Contents for Sony SNC-WR600

  • Page 1 A-EMG-100-17(1) Network Camera User’s Guide Software Version 3.0 Before operating the unit, please read this manual thoroughly and retain it for future reference. SNC-WR630/WR632/WR632C/WR600/WR602/WR602C © 2013 Sony Corporation...

  • Page 2: Table Of Contents

    Administrating the Camera Table of Contents Basic Operations of the Administrator Menu ...21 How to set up the Administrator menu .....21 Configuration of the Administrator menu ..21 Overview Configuring the System — System Menu ..22 Features ..............4 Information Tab ..........22 How to Use This User’s Guide ......
  • Page 3 What is VMF ............ 52 Setting items for motion detection ....53 VMF settings ............ 55 Face detection Tab — Set the face detection ..57 Network disconnection Tab — Monitoring the connection of a specified IP address ............58 Setting the Action output —...

  • Page 4: Overview

    Overview NOTICE TO USERS © 2013 Sony Corporation. All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to Features any machine readable form without prior written approval from Sony Corporation.

  • Page 5: How To Use This User's Guide

    How to Use This User’s System Requirements Guide The following computer environment is necessary for the computer to display images and the controls of the This User’s Guide explains how to operate the Network camera. Camera from a computer. (August 2017) The User’s Guide is designed to be read on the computer display.

  • Page 6: Accessing The Camera Using The Web Browser

    The live viewer window appears (in SSL Accessing the Camera communication). Using the Web Browser After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer. Start the Web browser on the computer and type the IP address of the camera in the URL address bar.
  • Page 7 Tips • The software is optimized for Internet Explorer using medium font. • In case a part of the image cannot fit the display, configure the display setting (magnification percentage) to 100%. If you use a display with high pixel density, the magnification percentage may be changed automatically.

  • Page 8: Basic Configuration By The Administrator

    Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera.

  • Page 9: Precautions For Preventing Access To The Camera By An Unintended Third Party

    Set the user name and password of the Precautions for administrator of the camera. For details, refer to “Setting the Security — User Preventing Access to tab on the Security menu” in the Administrator menu on page 39. the Camera by an Check the Referrer check checkbox.

  • Page 10: Operating The Camera

    Operating the Camera Administrator and User This network camera identifies those who log in as the Administrator or User. This section explains how to monitor the image from the The Administrator can use all the functions of this camera using your Web browser. network camera, including camera settings.

  • Page 11: Logging In To System

    When you display the viewer of the camera for Logging in to System the first time When you access the network camera using ActiveX viewer for the first time, the Security Warning appears. Click Yes and install ActiveX Control. You can use all Logging in as a user the functions of the viewer with ActiveX Control.

  • Page 12: Configuration Of Live Viewer

    Control panel section Configuration of Live You can drag the panels to the monitor screen and Viewer configure them. To return to the operation panel, drag the panel and This section explains the functions of the parts and configure the operation panel. controls of the live viewer.
  • Page 13 Capture Camera control panel Click to capture a still image shot by the camera and to store it in the computer. Click to open the folder to be saved. Note When protection mode (Windows > Control panel > Internet options > Security property) is enabled, still images cannot be captured.

  • Page 14: Monitor Image

    If you select a thumbnail when registering a preset You can also use the camera control panel bar to change position, it will be displayed with a thumbnail. the camera direction. The zoom operation using the mouse wheel is available Select the Preset position name from the list.

  • Page 15: Operating The Camera

    Control bar Operating the Camera The following operation buttons are available. There are three modes of camera operation: Area zoom mode, Vector dragging mode and PTZ Control bar. You can control pan/tilt, zoom and focus in either mode. Setting You can set the streaming method, image size, The available functions for the camera operation modes frame rate, PTZ operation mode and image codec.

  • Page 16: Panning And Tilting By Clicking The Monitor Image (Area Zoom Mode Only)

    Zoom control Panning, tilting and zooming by Click to zoom out, and click to zoom in. specifying the area (Area zoom Zooming continues while the button remains pressed. mode only) Click and hold the left button of the mouse on the monitor image, and drag the mouse diagonally to draw a Indicates the red frame around the portion you want to enlarge.

  • Page 17: Moving The Camera To A Preset Position (Common Operations In Area Zoom And Vector Dragging Modes)

    Moving the camera to a preset Controlling the Camera position (Common operations in on a Panorama Image Area zoom and Vector dragging modes) In the panorama window, a 360° view around the camera is displayed as a panorama image. When you click on Select a preset position name from the Preset position the displayed panorama image, the camera faces the panel.

  • Page 18: Switching Transmission Mode

    Click the point you want to watch in the panorama Switching Transmission window. The camera is moved to face toward the clicked Mode point, and the present image at the point is displayed in the monitor window. You can change the transmission mode for video/audio To rotate the panorama image data.

  • Page 19: Playback Viewer

    Search panel Playback viewer You can play, save or delete the movies recorded in the memory card. This function is available only in the following users. • Administrator • When Viewer mode is set to Full Specify the search period. Start Select the start time for searching.

  • Page 20: Monitor Image

    Save recorded movie Stop button Click this button to stop a movie playing. Save the selected movie to your computer. Click open the folder in which the movie is to be saved. Play button Play the movie. Delete recorded movie Click this button to play the movie at the normal speed Delete the selected movie(s).

  • Page 21: Administrating The Camera

    Select the required tab above the menu, and set each Administrating the Camera setting option in the tab. Example: “Date & time” tab of “System” menu This section explains how to set the functions of the camera by the Administrator. For details about monitoring the camera image, see “Operating the Camera”...

  • Page 22: Configuring The System - System Menu

    Network Configuring the System Displays the Network menu for setting the network connection. (“Configuring the Network — Network — System Menu Menu” on page 36) When you click System in the Administrator menu, the Security Displays the Security menu for setting the login user System menu appears.

  • Page 23: Installation Tab

    You can select the format between yyyy-mm-dd The name of the time zone is CentralStandardTime and hh:mm:ss (year-month-day hour:minutes:seconds), the time difference is 6 hours. The name of the summer mm-dd-yyyy hh:mm:ss (month-day-year time is DaylightTime, and the summer time offset from hour:minutes:seconds), and dd-mm-yyyy hh:mm:ss the time difference is 1 hour, starting from the second (day-month-year hour:minutes:seconds).

  • Page 24: Initialize Tab

    • Do not activate the Format memory card function Initialize Tab when no card is inserted into the card slot. Backup setting data Saves the setting data of the camera in a file. Click Save, and follow the instructions on the Web browser to specify the folder and save the setting data of the camera.

  • Page 25: System Log Tab

    Schedule Log information can be saved as a file by clicking Set time and date to perform the refresh operation Download of Download as file. periodically. Access log Tab Notes The access record of the camera is displayed. • Camera operation will be canceled when you run Click Reload to reload the latest data.

  • Page 26: Setting The Camera Image And Audio

    Iris priority: The camera performs the gain and shutter Setting the Camera speed adjustments automatically, and you can select the iris. Image and Audio Manual: Adjust the gain, iris and shutter speed manually. — Video / Audio Menu Wide dynamic range (View-DR) When you click Video / Audio in the Administrator...
  • Page 27 White balance Video out Set a signal to output the analog video from the video output terminal of the camera. Mode You can select NTSC or PAL. Select the White balance mode. When the video output mode is changed, the camera ATW: Eliminating the influences caused by returns to the home position.

  • Page 28: Video Codec Tab

    • The frame is skipped when playing an image. Video codec Tab • The audio is broken. Use this tab to set the items for the video codec. • The response of the camera to commands is delayed. Full HD dual stream mode Image size You can select the size of images sent from the camera.

  • Page 29: Audio Tab

    Bit rate Audio sending When you set Image codec to H.264 and set Bit rate Make settings for sending audio from the m compression mode to CBR, the bit rate of the image microphone input connector. transmission for a line can be set. When the bit rate is set to a high level, a high image Enable quality can be enjoyed.

  • Page 30: Superimpose Tab

    Type Superimpose Tab Set the type of display information to Text, Date & time, Event, Codec, Camera direction, Zoom ratio 1, and Zoom ratio 2. Text: Displays the custom string. Date & time: Displays the date and time. Event: Displays the event alarm information. Codec: Displays the video codec information.

  • Page 31: Day/Night Tab

    For example: How to set Area title; Background color Select the background color of the superimposed text. Select the radio button of the area number to be set. Alignment Enter the area name. Set the horizontal position of the superimposed text. Check “Enable”...

  • Page 32: Privacy Masking Tab

    Timer Preview screen Normally the camera works in day mode. It switches to This screen is for monitoring images and configuring night mode at the time you set in Timer of Day/Night in privacy masking. the Schedule menu. You can move the position of the privacy mask displayed on the preview screen by drag and drop.
  • Page 33 Setting a privacy mask Note Operate according to the following procedure to set a The specified zoom position can be set within the optical privacy mask in the position of your choice: zoom area. Click Set under Display mask from current position, Select the number to register from the Position click the Mask area bar, or Set by value to specify the drop-down list.

  • Page 34: Streaming Tab

    OK/Cancel Audio port number Specify the transmission port number of the audio data. See “Buttons common to every menu” on page 21. It is initially set to 56000. Specify an even number from 1024 to 65534. Three port numbers (the number specified here and an odd number with 1 added to the Streaming Tab specified number) are used for audio data...
  • Page 35 Video port number 1, 2, 3 RTSP time out Specify the H.264 video transmission port number used Specify the time out of the Keep-Alive command by for the multicast streaming. The default setting is 60000, RTSP streaming. You can set the time out from 0 second 62000 or 64000.

  • Page 36: Configuring The Network - Network Menu

    IP address Configuring the Network Displays the current IP address. — Network Menu Subnet mask Displays the current subnet mask. When you click Network in the Administrator menu, the Default gateway Network menu appears. Displays the current default gateway. Use this menu to configure the network to connect the camera and the computer.

  • Page 37: Qos Tab

    Host name Type the host name of the camera to be transmitted Type the MTU value for the Ethernet port. to the DHCP server. This setting is valid only when To obtain DNS server address Obtain an IP address automatically (DHCP) is selected.

  • Page 38: Upnp Tab

    IPv4 QoS Move up Increases the priority of the rule. Select a rule from the QoS table to prioritize and click Enable Move up. Select the checkbox to configure the QoS setting for IPv4. Move down Decreases the priority of the rule. Rule Select a rule from the QoS table to lower its priority and Used to register, edit and delete QoS.

  • Page 39: Setting The Security - Security Menu

    Pan/Tilt: In addition to the Light mode, the user can Setting the Security operate pan/tilt/zoom. Light: In addition to the View mode, the user can select — Security Menu the image size of the live viewer, select codec and capture a still image. View: The user can only monitor the camera image.

  • Page 40: Access Limit Tab

    OK/Cancel Access limit Tab See “Buttons common to every menu” on page 21. SSL Tab This allows you to control which computers can have access to the camera. Likewise, when using IPv6, security settings can be configured for each network. Enable Select the checkbox to enable the access limit.
  • Page 41 • When using the SSL function, always configure the Note settings after setting the date and time of the camera. If the date and time are not correctly set, it may cause SSL connection will load the camera down; therefore, browser connection problems.
  • Page 42 To delete the imported certificate or self-signed Note certificate The import process becomes invalid if the selected file is Click Delete to delete the certificate or self-signed not a certificate or the imported certificate is not certificate imported to the camera. allowed.

  • Page 43: How To Install The Ca Certificate

    To import the CA certificate “.cer”. Double-click this file. The following Certificate dialog appears. Click Browse… to select the CA certificate to be saved in the camera. Click the OK button appearing on the dialog. The selected file will be imported to the camera. Note Import process will be invalid if the selected file is not a CA certificate.

  • Page 44: To Remove An Installed Ca Certificate

    Select Automatically selects the certificate store There may be a case that a certificate cannot be based on the type of certificate and click Next. removed by the steps above due to the type of Completing the Certificate Import Wizard certificate.

  • Page 45: To Import The Personal Certificate

    To import the personal certificate 802.1X Tab To use client authentication, follow the steps below to import the personal certificate. Double click the personal certificate stored in your Certificate Import Wizard is displayed. Start importing by marking Enable this key as exportable during the process.

  • Page 46: System Configuration Of 802.1X Network

    • When using the 802.1X authentication function, EAP identity always configure the settings after setting the date and Type the user name to identify the client in the 802.1X time of the camera. If the date and time are incorrect, authentication server up to 250 characters.

  • Page 47: Referrer Check Tab

    Status To import the CA certificate Shows if the status of the client certificate is valid or Click Browse… to select the CA certificate to be invalid. imported. Valid means the client certificate is correctly stored Click the OK button appearing on the dialog, and the and set.

  • Page 48: Setting The Ptzf Control - Ptzf Control Menu

    Setting the PTZF control Register the values of the Host name and Port No. you typed to the list of the selected number. — PTZF control Menu Delete When you click PTZF control in the Administrator menu, Delete the contents of the list selected in No. the PTZF control menu appears.

  • Page 49: Preset Position Tab - Saving Pan/Tilt/Zoom Position

    Enable Preset position Tab — Saving pan/ Select the checkbox to enable the auto flip function. tilt/zoom position When you hold on the control panel to make the direction of the camera pass through the point where it faces the ground, the auto flip function is activated, and the displayed picture is reversed.

  • Page 50: Preset Tour Tab - Setting A Preset Tour

    Speed Preset tour Tab — Setting a preset Select the speed of camera movement between 1 and 23, tour or Fastest from the drop-down list. The camera moves faster with a higher number setting. The fastest speed is obtained with Fastest. Stay time Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds.

  • Page 51: Setting The Sensor Input/Camera Tampering Detection/Motion Detection - Action Input Menu

    Event condition 1, 2, 3, 4, 5 Setting the Sensor input/ Select the event condition. You can combine the alarm using the following event Camera tampering execute conditions. and: detect when both conditions happen within a detection/Motion specified interval regardless of the sequence. or: detect when either condition happens.

  • Page 52: Sensor Input Tab - Set The Sensor Input 1/2/3/4

    Detection status Sensor input Tab — Set the sensor Display the tampering detection state of the time when input 1/2/3/4 Camera tampering detection tab is opened. To clear the detection status, click Clear button. Auto clear Clear the detection status automatically. Select the checkbox to set the time to be cleared automatically.

  • Page 53: Setting Items For Motion Detection

    • An alarm sounds when an object passes through area Target Image A and enters area B. Select All PTZ position or Preset position. • An alarm sounds when an object passes through areas A and B, and enters area C. All PTZ position •...
  • Page 54 When you place the cursor on the vertex of the area, A value from 1 to 256 can be specified. the cursor changes to n, which you can drag to Clicking Return to the default changes the value to the move the vertex.

  • Page 55: Vmf Settings

    This criterion is for whether a moving object exists in VMF settings the trigger area. Set the alarm to sound when the specified conditions Similar to an active window, a trigger area can also be (Intrusion, Passing, Left object, Removed object) of moved and vertexes can be moved, added or deleted.
  • Page 56 Left object Trigger size Specify the minimum trigger size and maximum trigger size of motion. To specify the size, you can either enter values or drag the vertexes of the area. This criterion is for whether a moving object has been left in the trigger area.

  • Page 57: Face Detection Tab - Set The Face Detection

    Trigger speed conditions of 2 are met within 3 seconds from when the inspection conditions of 1 are met. Specify the minimum and maximum speeds to be detected. VMF status indicator of Matching decision The indicator is on when the set filter type conditions are met.

  • Page 58: Network Disconnection Tab - Monitoring The Connection Of A Specified Ip Address

    • Perform the following before setting the face If you click Cancel, changes made to the settings will be detection. discarded and the screen will be reloaded with the – Deselect the checkbox of Stabilizer in the current camera settings. Installation tab of the System menu.

  • Page 59: Setting The Action Output - Action Output Menu

    Mail Transfer Tab — Setting the Setting the Action e-Mail (SMTP) Function output — Action output Menu Action output When you click in the Administrator menu, the Action output menu appears. The Action output menu consists of the Execution Condition, Mail Transfer, Alarm output, Edge Storage, Voice alert, HTTP alarm notification and FTP still image sending tabs.
  • Page 60 User name, Password Note Type the user name and password of the user who owns Models sold in China do not support the TLS function. the mail account using up to 64 characters. This setting is necessary when the SMTP server that sends e-mails performs authentication.

  • Page 61: Alarm Output Tab - Setting The Alarm Output

    The actual image file name will be the specified image Recipient e-mail address file name with a suffix and the extension .jpg. Type the recipient's e-mail address within 64 characters. OK/Cancel Suffix Select a suffix to be added to the file name used when the See “Buttons common to every menu”...

  • Page 62: Edge Storage Tab - Setting The Edge Storage Movie And Still Image Function

    720 or above, set the video codec as follows: – SNC-WR630/WR632: Set the Image quality below – SNC-WR600/WR602: Set the Image quality below – Set the Frame rate to 1 fps. • When you record, set the Image codec 2 and Image codec 3 of the Video codec tab in the Video / Audio menu to Off.

  • Page 63: Voice Alert Tab

    Path: Displays the path name of the recording still Audio: Set whether to record the audio signals input image file. from the camera. When you select a file, a still image will be displayed. Select the checkbox to record. Delete: Click Delete to delete the selected folder or file. Note If you select a folder, any files in the folder will also be deleted.

  • Page 64: Http Alarm Notification Tab

    User name Note Type the user name for authentication using up to 64 Before using the voice alert function, you need to save characters. the audio file to the camera using the SNC toolbox. You can download SNC toolbox and application guides from Password the download site.

  • Page 65: Ftp Still Image Sending Tab

    OK/Cancel Suffix Select a suffix to be added to the file name used when the See “Buttons common to every menu” on page 21. image is sent. Date & time: The date & time suffix is added to the image file name. FTP still image sending Tab The date &...
  • Page 66 Sequence number clear Manual sending If you click Clear, the suffix of the Sequence number returns 1. Image to be sent Select the video codec mode of the image of manual Test sending. If you click Execute, the image will be sent to the FTP For detailed settings of video codec mode, see the Video server once for testing according to the settings of codec tab in the Video / Audio menu.

  • Page 67: Setting The Schedule - Schedule Menu

    Setting the Schedule — Schedule Menu When you click Schedule in the Administrator menu, the Schedule menu appears. The Schedule menu consists of the Schedule tab. Schedule Tab When you click the Schedule tab, the setting menu for each action is displayed. You can set the schedule of the following actions;...

  • Page 68: Glossary

    DNS server Others Acronym for Domain Name System server. As an IP address required for connecting to the device on an IP network is numerical and difficult to remember, the Domain Name System was established. A domain name Glossary is alphabetic and is easier to remember. When a client computer uses a domain name to connect to another computer, it asks a DNS server to translate the name into ActiveX control...
  • Page 69 Network bandwidth the other protocol, TCP, UDP can transmit data faster, but reliable communication is not guaranteed. Bit rate that can be used for networking. Unicast NTP server Transmission of data to specified equipment on a Network time server that transmits and receives time network by specifying a single address.

  • Page 70: Index

    Camera tampering detection Tab..52 Exception list........47 Index Cancel button........21 Execution Condition Tab....59 Capture ........13, 68 Exposure.........26 CBR..........68 Numerics Clear ..........32 Clear all ..........32 Face detection Tab......57 802.1X Tab ........45 Client certificate ......46 Factory default........24 Codec..........68 File..........64 Color..........32 File attachment .......60 Access limit Tab ......40 Common setting ...37, 41, 46, 62 Filter settings ........55...
  • Page 71 IPv4 setting ........36 IPv6 setting ........37 Pan/Tilt....... 13, 15, 17 Saturation ........69 Panorama image......17 Schedule Menu....... 67 Panorama mode......49 Schedule Tab ........67 JPEG ..........68 Passing ........... 53 Screen mode........12 Password ........39, 60 Search panel ........
  • Page 72 Trigger speed........57 Trouble sending......61 UDP..........69 Unicast..........69 Unicast streaming......34 UPnP ..........38 User ..........10 User name.........39, 60 User Tab .........39 VBR..........69 Vector dragging ......15 Video / Audio Menu.......26 Video codec Tab ......28 View panel........12, 19 View size ........12 Viewer authentication.....39 Viewer mode ......10, 39 VMD settings .........53 VMF ..........52 VMF settings........55...
  • Page 73 Sony Corporation...

This manual is also suitable for:

Snc-wr632Snc-wr632cSnc-wr630Snc-wr602Snc-wr602c4905524947953

Table of Contents