Firmware Version Upgrade - Sony SNC-WR632C Service Manual

7. Check that OK is displayed in the lower right area of the screen. (The writing of serial number is
completed.)
n
If OK is not displayed, perform the procedure from step 1 again.
Completion
1. Exit out of G6 Serial_Inputter For Service.
2. Turn off the power and disconnect the connection of each equipment.

2-1-4. Firmware Version Upgrade

Required equipment and tools
. Personal computer (PC)
t
For the operation environment, refer to "System Requirements" in the User's Guide.
. Color video monitor
. Latest update firmware
. Latest SNC toolbox
t
Downloadable from the following URL.
http://www.sony.net/ipela/snc
. Power supply for this unit:
24 VAC power supply (rating: 80 W or more) or HPoE + Hub (Powerdsine PD-9501G or equivalent)
SNC-WR632C/WR602C
Check that OK is displayed.
2-7 (E)