1-4-8. DC Fan
n
. The identical parts are used for the two side cabinets. Therefore, they can be attached to either the right
or left side of the camera block.
The side cabinets are indicated as the side cabinet (left) and side cabinet (right) in the illustration.
. The identical parts are used for the two camera cabinets. Therefore, they can be attached to either the
upper or lower side of the camera block.
The side cabinets are indicated as the camera cabinet (upper) and camera cabinet (lower). in the illustration.
1. Remove the cabinet. (Refer to Section 1-3.)
2. Remove the TILT block. (Refer to Section 1-4-3.)
3. Insert the pin into the portion A, then remove the hook (C) of the side cabinet (right) in the direction
of the arrow B.
4. Insert the pin into the portion D, then remove the hook (F) of the side cabinet (right) in the direction
of the arrow E.
5. Remove the hook (G), then remove the side cabinet (right).
6. Remove the side cabinet (left) in the same procedure as steps 3 to 5.
Portion A
Pin
1-16 (E)
Side cabinet (left)
Pin
B
Portion D
Pin
E
B
Hook (C)
Side cabinet (right)
Pin
B
Hook (G)
Hook (F)
SNC-WR632C/WR602C