Scaling The Meter (Scale) - FlowLine LI25 Series Instruction Manual

LI25 Series Loop-Powered Meters

Scaling the Meter (sCalE)

The 4-20 mA input can be scaled to display the process in engineering
units.
A signal source is not needed to scale the meter; simply program the
inputs and corresponding display values.
sCalE
inpt1
04. 0 00
Set Input 1
Value
Press Enter to Accept Setting
Press Up to Set Digit Value
Press Right to Select Next Digit
Press Menu to Exit at any Time
dsPL1
For instructions on how to program
numeric values see Setting Numeric
Values, page 16.
0. 0 000
Set Display 1
Value
20
Instruction Manual
inpt2
Scale
Input 2