LI25 Series Loop-Powered Meters
Setting Up the Meter (setup)
The Setup menu is used to select:
1.
Decimal point position
2.
Engineering units display
Press the Enter/Ack button to access any menu or press Up arrow
button to scroll through choices. Press the Menu button to exit at any
time.
setuP
Setting the Decimal Point (deC. p t)
Decimal point may be set with up to four decimal places or with no
decimal point at all.
Pressing the Right or Up arrow moves the decimal point one place to
the right until no decimal point is displayed, then it moves to the left
most position.
Previous
deC. P t
deC. p t
units
Select Decimal
Point
ddddd
17
Instruction Manual
or
Next