Setting The Units Display (Units) - FlowLine LI25 Series Instruction Manual

LI25 Series Loop-Powered Meters

Setting the Units Display (units)

The meter can be set to display a combination of three alphanumeric
characters for engineering units or for identification (eg. PSI, G/S, LpM,
TK3, , L 7). There is also a fourth alphanumeric character located above
this row, which supports a degrees symbol and "x10" symbol (eg. °C, °F,
3, 6, 9).
x10 x10 x10
Press Right arrow to select next unit and Up arrow to increment unit.
The unit being changed blinks.
Press the Enter/Ack button, at any time, to accept a setting or Menu
button to exit without saving changes.
D
aBC
Select Next
Character
D
aBC
Increment
Character
18
Instruction Manual
D
aCC
Accept Setting
Next
Setting