Setup And Programming - FlowLine LI25 Series Instruction Manual

LI25 Series Loop-Powered Meters

SETUP AND PROGRAMMING

•
•
Overview
There are no jumpers involved in the setup process of the meter.
Setup and programming is done through the front panel buttons.
After all connections have been completed and verified, apply power to
the loop.
There is no need to recalibrate the meter for
milliamps when first received from the factory.
The meter is factory calibrated for milliamps
prior to shipment. The calibration equipment
is certified to NIST standards.
Quick User Interface Reference Guide
go to page 37
For
13
Instruction Manual