Table of Contents
Advertisement
<Remarks>
UAD 0 Bits 7 to 5:
Sets the range of the dial tone frequency that should be detected when calling directly to a PSTN.
UAD 0 Bits 4 to 2:
Sets the time when the dial tone is recognized when calling directly to a PSTN. When a dial tone is
continuously detected for the time specified, the facsimile regards the line as being connected.
UAD 0 Bits 1 and 0:
Sets the allowable gap during line current detection when calling directly to a PSTN. In line current
detection, even if there are gaps within the time specified in this setting, the counter is not reset and
continues to count the duration of line current detection after the current is re-detected.
When "BZT" is selected for "DTC/LCC for PSTN" in UAD 1, this setting is ignored.
January 2001 © TOSHIBA TEC
1 - 65
GD-1060 ADJUSTMENT ITEMS
Advertisement
Table of Contents
