Table of Contents
Advertisement
<Remarks>
FUNC 6 Bits 7 to 4:
These bits set the modem speed. The speed should be programmed when the telephone line quality
is poor.
FUNC 6 Bits 3 and 2:
These bits set a threshold value to judge image quality. To make the criteria stringent, 00 (5%) should
be selected. When the threshold value is exceeded, RTN will be initiated.
FUNC 6 Bit 1:
This bit selects the monitor type when the line monitor function is turned on. When this bit is set to 0
(BEFORE TRANSMISSION MONITOR), monitoring stops on receiving DIS. When this bit is set to 1
(PROTOCOL MONITOR), monitoring is performed during communication, like forced line monitor.
January 2001 © TOSHIBA TEC
1 - 19
GD-1060 ADJUSTMENT ITEMS
Advertisement
Table of Contents
