Table of Contents
Advertisement
• UAD 2
Bit
7
Range of dial tone frequency (PABX):
6
000:
300Hz to 600Hz
5
001:
300Hz to 650Hz
010:
390Hz to 550Hz
011:
400Hz to 450Hz
100:
350Hz to 480Hz
101:
300Hz to 500Hz
110:
Reserved
111:
Reserved
4
Detection time to recognize as dial tone (PABX):
3
000:
2 sec.
2
001:
800 msec.
010:
400 msec.
011:
1 sec.
100:
1.3 sec.
101:
1.8 sec.
110:
2.5 sec.
111:
150 msec.
1
Allowable gap during line current detection (PABX):
0
00: Off
01: 50 msec.
10: 100 msec.
11: 200 msec.
<Remarks>
UAD 2 Bits 7 to 5:
Sets the range of the dial tone frequency that should be detected when calling through a PABX.
UAD 2 Bits 4 to 2:
Sets the time when the dial tone is recognized when calling through a PABX. When a dial tone is
continuously detected for the time specified in this setting, the facsimile regards the line as being
connected.
UAD 2 Bits 1 and 0:
Set the allowable gap during line current detection when calling through a PABX. In line current
detection, even if there are gaps within the time specified in this setting, the counter is not reset and
continues to count the duration of line current detection after the current is re-detected.
GD-1060 ADJUSTMENT ITEMS
Contents
1 - 68
Link with User
Function Setting
—
—
—
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
