When The Add Paper Indicator Lights Up; Adding Paper - Konica Minolta DI183 User Manual

8
8.2

When the Add Paper Indicator Lights up

If paper runs out during a copy cycle, the Add Paper indicator lights up and
the copy cycle is stopped.
Identify the specific tray that has run out of paper on the control panel.
Then, following the procedure given in "Adding Paper" below, add paper
as necessary.

Adding Paper

<1st Tray>
1
Slide out the 1st Tray.
Do you know the special
?
precautions to be used when the
tray has been slid out?
➜ Be careful not to touch the
surface of the Paper Take-Up
Roll.
2
Press down on the Paper Lifting
Plate until it clicks into the locked
position.
8-4
Error Displays and Other Indicators
Paper Take-Up Roll
Paper Lifting Plate
Di152/Di183