Explo X2 Wave Flamer Manual page 61

ATTACHMENT 3 – IGNITION
ELECTRODES
IS THE IGNITION SET CORRECTLY?
Set a distance of 10mm and 4mm of the electrodes as pictured.
ARE THE CERAMICS OR THE ELECTRODES DIRTY?
If strongly soiled, the spark can jump over at another place. Clean the ceramics and the ignition
electrodes carefully with an old toothbrush until they are free of dirt and soot.
IS DIRT INSIDE THE NOZZLE?
Even small parts of dirt can divert the fuel from the nozzle. Unscrew the nozzle from its place and
clean it with pressurized air. Also check the threading for dirt.
IS THE CORRECT FUEL USED?
Use the correct mix of Bioethanol and castor oil. Do not use coloured fluids. Salts can damage the
pumps and clog the nozzle.
IS THE SEALING RING OR THE NOZZLE DAMAGED?
Should the nozzle be damaged, it may lead to a diversion of the fuel ejected.
ARE THE IGNITION ELECTRODES CABLES DAMAGED?
Check if the cables leading to the ignition are damaged.