Advertisement
Step 4: Login to your BEC 4700AZ the 4G/LTE Wireless Outdoor Router
The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the
attached PC to this router is in the same subnet and has an IP address in the range between
192.168.1.1 ~ 192.168.1.253.
Open a web browser and type http://192.168.1.254 in the URL address bar.
URL Address bar: type
http://192.168.1.254
The login prompt will appear. Input the default username (admin) and password (admin) for
Account type, Administrator.
Please see the relevant sections of user manual for detailed instructions on how to
configure your BEC 4700AZ outdoor router.
Step 5: Use the Quick Start wizard for fast Internet connection setups.
5.1 Change administration password: Setup a new password for "admin"
account for
device management. The default password is "admin". Click Continue to go
on to the next step.
*The password may vary by different Internet Service Providers.
New Password: assign a new,
unique password
Confirm Password: re-enter the
new password again
Next Step: click
Next
5.2 Time Zone Configuration: Enable and select your Time Zone then click
Continue to go on to the next step
Time Zone: select your
Next Step: click
Next
5.3 Internet Connection Setup: Fill out all relevant parameters provided by your ISP.
5.4 Saving Configuration Settings: The Setup Wizard has completed. Click BACK to
make changes or correct mistakes. Click NEXT to save settings. If the Internet connection is
not ready, please double check your WAN settings again.
*This username / password may vary by different Internet Service Providers.
time zone
Quick Start Guide
16
Advertisement
