BEC 4700A Quick Start Manual page 16

(4g/lte) wireless outdoor router

Hide thumbs Also See for BEC 4700A:

Step 4:

Powering via PoE Injector: Insert the other end of outdoor Ethernet cable (RJ-45) to the

supplied Gigabit PoE injector Data+Power port. Use another Ethernet cable (RJ-45) and

connect directly to the Data port on the injector and the other end of cable to a switch or

broadband router.

IMPORTANT: It is recommended to put the Gigabit PoE Injector on an UPS or Surge Protector. Use the

supplied grounding wire to ground your BEC 4700A / 4700AZ ODU is REQUIRED!

Powering via a PoE Switch: To connect the other of RJ-45 cable from the 4700A/ 4700AZ

PoE_IN port to a PoE switch.

2. Set up Your Internet Connection

BEC 4700AZ (LTE & Wi-Fi AP)

Step 1: Unscrew the cap of SIM card slot.

Quick Start Guide

Table of Contents

4700az